Are you worried about the amount of water that flows down the drain while you wait for hot water to arrive to your sink. Then worry no more, you are in a place where we will show you how this will never happen to you again.

Do you wait for ever for the hot water to flow to your sink?

Would you like hot water in the Garage, Loft conversion, Office, Clinic, Surgery, Greenhouse, Canteen,
Toilet, Dairy, Calving unit, Lambing unit, Stables, Mobile home, Caravan, Security hut, Mobile toilet, laundry room, Bedroom?

If you answered yes to any of the questions above then we have an Electric Hot Tap to suit your needs.

The Electric Hot Water Tap, EHT10, is designed to give you hot water directly at your kitchen sink without turning on the immersion or heating. With the EHT10 there is no storage of hot water therefore you only heat the amount of water you need. In recent independent trials carried out by an Irish electricity supplier our EHT range were found to be 97% more efficient than using a 20 litre water heater.

Traditionally we all either turn on the immersion or the heating system to heat up water however doing this has three fundamental flaws.

3: Because the water has a long way to travel from the boiler to the tap a lot of water is wasted whilst you wait for the hot water to come through to the sink. With water charges on the way we can no longer afford to continue to do this.

The EHT10 can be fitted to most sinks and Granite worktops with a depth of 30mm maximum. Just give us a ring and we can talk your plumber through the simple installation.
The EHT range are designed with ease of installation and ease of use forefront to our manufacturing process. Now used by thousands of satisfied
domestic customers. In an expanding commercial sector the EHT range have fast become the latest must have water heating system.
The EHT10 is connected to your incoming cold drinking water supply and plugged into 13amp electrical supply. Surely this must be the easiest, quickest and most efficient way of heating water at a kitchen sink. Yes you can also get cold water from the EHT10. In fact because its the drinking water that is heated you can drink the hot water direct from the EHT10. Fill your kettle, pots, pans and your water will already be hot direct from you EHT10.

How To Purchase

There’s a number of ways to purchase one of these amazing taps.

1: Just click on the add to cart button above and pay with your credit card or by using PayPal.

2: If you don’t like shopping online just ring us at 025/84290 Monday to Friday 9am to 5pm and we can take your order there. Please be patient sometimes our lines are very busy. You can also just click on the REQUEST A CALL BACK button below and leave your details. WE WILL CALL YOU BACK.

3: Just email us at info@watersave.ie and leave your phone number and we will ring you back.

4: For bulk purchases or installation packages please contact Watersave 025/84290 for a dedicated quote.

Orders are generally sent by courier the same day as you purchase or at the latest the day after. We have had occasions this year where taps were on back order due to their popularity.
Online weekend purchases are sent out on Monday morning, except on bank holidays when it’s on Tuesday.

So go ahead join the masses that are saving money every day and get yourself an EHT10.

For guarantee information please see the installation guide available here.

The Electric Hot Water Tap, EHT40, is designed especially for washrooms and helps you to get hot water right at your sink without turning on the immersion. In recent independent trials carried out by an Irish electricity supplier our EHT range were found to be 97% more efficient than using a 20 litre water heater.

Traditionally we all either turn on the immersion or the heating system to heat up water however doing this has three fundamental flaws.

1: It takes a long time for the water to heat up (generally about 30/45 minutes for a 55 litre immersion @ 55c) and this can be particularly frustrating especially when you are in a hurry.

2: Very often we turn on the heating system or immersion and heat a full tank of hot water when we only need to use a few litres washing you hands, cleaning your make up after a night out or having a shave. The rest of the heated water is adding unnecessarily to your energy bill.

3: Because the water has a long way to travel from the boiler to the tap a lot of water is often wasted whilst you wait for the hot water to come through to the sink. With water charges on the way we can no longer afford to continue to do this.

The EHT40 can be fitted to most wash basins.
The EHT range are designed with ease of installation and ease of use forefront to our manufacturing process. Now used by thousands of satisfied domestic customers and in a growing commercial sector the EHT range have fast become the latest must have water heating system.
The EHT40 is connected to your incoming cold drinking water supply and connected using a fused spur outlet to a 13amp electrical supply. Surely this must be the easiest, quickest and most efficient way of heating water in wash basin. Yes you can also get cold water from the EHT40. In fact because its the drinking water that is heated you can drink the hot water direct from the EHT40. No more washing your teeth in dirty water that is stored in a tank in the attic.

Technical Specifications

Electrical
Nominal Power Rating / 240V 3KW
MCB Protection Device / 16Amps
Electrical Supply / 13 Amp Three Pin Plug Or Fused Spur Outlet
Cable Entry Point / Pre Wired
Cable Size / 2.5mm²
Heating Range / Ambient to 50c / 60c Max. Winter water temperature will affect the heating range

Water
Inlet Connection / 15mm Flexi Hose with Isolation Valve
Water Entry Points / Bottom
Minimum Running Pressure / 1.0 bar
Maximum Static Pressure / 2 bar

For best results the EHT40 must be connected to a mains water supply.

Where to use
In Wash Basins.
Home, Business, Garage, Attic Conversion, Basements, Caravans, Mobile Homes, Cow Sheds, Lambing Units,

How To Purchase

There’s a number of ways to purchase one of these amazing taps.

1: Just click on the add to cart button above and pay with your credit card or by using PayPal.

2: If you don’t like shopping online just ring us at 025/84290 Monday to Friday 9am to 5pm and we can take your order there. Please be patient sometimes our lines are very busy. If this is the case just leave a message on our automatic answering system and we will ring you back. We have done this to avoid you listening to silly music while you wait for someone to answer a phone.

3: Just email us at info@watersave.ie and leave your phone number and we will ring you back.

4: For bulk purchases or installation packages please contact Watersave 025/84290 for a dedicated quote.

Orders are generally sent by courier the same day as you purchase or at the latest the day after. We have had occasions this year where taps were on back order due to their popularity.
Online weekend purchases are sent out on Monday morning, except on bank holidays when it’s on Tuesday.

So go ahead join the masses that are saving money every day and get yourself an EHT40.